10-20 Theoretical Plate Distillation Column , Multicomponent Vacuum Distillation Tower

10 - 20 Theoretical plate Distillation Column for CBD / THC / Hemp oil / Cannabissativa

——Particular features

Continuous distillation process.
Low operating pressures (100~10000Pa ,100Pa=1mbar).
Short residence time.
High evaporation rates.
Processing of high-boiling, high-viscosity or crystallizing products is possible.
Can be used as a reboiler for column.
Low fouling on evaporator wall.

Remove the fractionation column from the Distillation Column and pack the internal space with steel wool. The steel wool increases the surface area the vapors interact with and slows the movement of the vapors up the column. The longer the vapors take to reach the top of the Distillation Column, the higher the purity of the fraction and the greater the efficiency of the column. You can use any highly porous, non-absorbent material for the column packing material.

Raise the temperature of the heat source slowly to give the fractions time to interact and complete their movement up the column and down the condenser arm. Many industrial manufacturers increase the surface area in the column to recover fractions that have a boiling point separated by less than a degree.

Wrap the Distillation Column with an insulator like aluminum foil. The insulation will allow the vapors to travel all the way to the top of the column and out the condenser. The increase in efficiency results from the repeated interaction with the column packing. The vapor condenses on the metal and drops back to the boiling pot to evaporate again.

lab distillation column

fractional distillation tower

10-20 Theoretical Plate Distillation Column , Multicomponent Vacuum Distillation Tower Images